Hantek DSO5102P 100 Mhz Dijital Osiloskop

www.emfaelektronik.com.tr
www.osiloskops.com

Name	DSO5000P Series Digital Storage Oscilloscope
SC	Bandwidth:60-200MHz,1GSa/s Real Time sample rate Large (7.0-inch) color display,WVGA(800x480)
Full	1.Download: 【Software】   【Manual】  【Firmware】  【Driver】 2.Accessories: 3.Other Pictures: 4. Features • 200/100/70MHz bandwidths •1GSa/s Real Time sample rate • Large (7.0-inch) color display,WVGA(800x480) • Record length up to 24K • Trigger mode: edge/pulse width/line selectable video/slop/overtime etc. • USB host and device connectivity, standard • Multiple automatic measurements • Four math functions, including FFTs standard • Provides software for PC real-time analysis 5. Specifications Model DSO5202P DSO5102P DSO5072P Bandwidth 200MHz 100MHz 70MHz Real-time Sample Rate 1GSa/s Equivalent Sample Rate 25GSa/s Record Length 24K SEC/DIV Range 4nS/div-40S/div (in a 2, 4, 8 sequence) Delay Time Accuracy 500ps Vertical A/D Converter 8-bit resolution, each channel sampled simultaneously VOLTS/DIV Range 2mV/div～5V/div at input BNC Position Range ±50V(5V/div),±40V(2V/div～500mV/div),±2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div) Rise Time at BNC ≤1.7ns ≤3.5ns ≤5ns DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div±3% for Sample or Average acquisition mode, 5V/div to 10mV/div Trigger System Trigger Sensitivity (Edge Trigger Type) DC:  1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to 200MHz; EXT: 200mV from DC to 40MHz EXT/5:1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity Trigger Level Range CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV) Holdoff Range 100ns-10s Trigger Type Edge Trigger on the rising or falling edge Pulse Width Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s Video Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) Slope Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s Overtime from the rising or falling edge Set Time: 20-10s Alternate Internal trigger on edge, pulse width, video or slope Measurement Cursors Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz. Tracing: The voltage and time at a waveform point; Automatic(32) Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF Display Type Right angle 7"TFT 16-digit color LCD Resolution 800*480 dots Contrast 16 gears, with the progress bar to show adjustment Interface USB host and USB slave Power Supply Voltage 100-120VACRMS(±10%)，45Hz to 440Hz，CATⅡ 120-240VACRMS(±10%)，45Hz to 66Hz，CATⅡ Power <30W Fuse 2A, T rating, 250V Mechanical Size Length: 313mm Width: 108mm Height: 142mm Weight 2.08KG (exclusive of packing and accessories)