Full |
1. Download:
2.Accessories:
3.Other Pictures
Connected to the computer can be used as a virtual oscilloscope
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. Characteristic(Handheld Oscilloscope/Multimete)
• High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
• Build in Video Help and 2G SD flash memory.
• 1M Memory Depth.
• High Refresh Rate (2500 frames)
• Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design --More clear, More Detailed
• One-touch automatic setup optimizes the position, range, timebase,
and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its
frequency components to measure harmonic content and distortion in
systems
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
5. Hardware Specification
Model
|
DSO1202BV
|
DSO1102BV
|
DSO1062BV
|
Oscilloscope mode
|
Bandwidth
|
200MHz
|
100MHz
|
60MHz
|
Real-time Sample Rate
|
1GSa/s
|
Equivalent Sample Rate
|
25GSa/s
|
Record Length (Sample Points)
|
Single-channel: Maximum 1M; Dual-channel: Maximum 512k
|
SEC/DIV Range
|
2nS/div-2000S/div (in a 2, 4, 8 sequence)
|
Delay Time Accuracy
|
500ps
|
Video Help
|
Build in
|
Flash Memory
|
Build in 2G SD Card
|
Vertical
|
A/D Converter
|
8-bit resolution
|
VOLTS/DIV Range
|
2mV/div~5V/div at input BNC
|
Position Range
|
±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
|
Rise Time at BNC
|
≤1.7ns
|
≤3.5ns
|
≤5.8ns
|
DC Gain Accuracy
|
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
|
Trigger
|
Trigger Sensitivity (Edge Trigger Type)
|
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to FullAC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
|
Trigger Level Range
|
CH1,CH2: ±8 divisions from center of screen
|
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)
|
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
|
Hold off Range
|
100ns-10s
|
Trigger Type
|
Edge
|
Trigger on the rising or falling edge
|
Pulse Width
|
Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s
|
Video
|
Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
|
Slope
|
Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s
|
Overtime
|
from the rising or falling edge Set Time: 20-10s
|
Alternate
|
Internal trigger on edge, pulse width, video or slope
|
Measurement
|
Cursors
|
Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz. Tracing: The voltage and time at a waveform point
|
Automatic(32)
|
Frequency,
Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time,
+Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty,
Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS,
FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
|
Meter Mode
|
Max. Resolution
|
6,000 Counts
|
DMM Testing Modes
|
Voltage, Current, Resistance, Capacitance, Diode & Continuity
|
Max. Input Voltage
|
AC: 600V, DC: 800V
|
Max. Input Current
|
AC: 10A, DC: 10A
|
Input Impedance
|
10 MΩ
|
Display
|
Type
|
Right angle 5.6 16-digit color LCD
|
Resolution
|
640*480 dots
|
Contrast
|
16 gears, with the progress bar to show adjustment
|
Interface
|
USB host and USB slave, LAN Optional
|
Power Supply
|
Voltage
|
DC Input:12--17VDC, 1500mA
|
Mechanical
|
Size
|
245 x 163 x 52 (mm)
|
Weight
|
1.3KG (exclusive of packing and accessories)
|
6.Software:
Operating system: Windows 7, Windows NT, Windows 2000, Windows XP ,VISTA
|
Hiç yorum yok:
Yorum Gönder